Filter
Top Products
36
www.gateway.com
4 Move the shorting block from pins 2-3 to pins 1-2 on the Boot Block Update jumper
(J1B1) on the IMM module.
5 Replace the PCI riser assembly.
6 Follow the instructions in “Closing the server case” on page 44, then reconnect the
power cord.
7 Create a DOS-bootable USB Disk-on-key device or DOS-bootable CD.
8 Download the BMC update file from support.gateway.com.
9 Follow the instructions included with the update file.
10 Turn off the server, then disconnect the power cord(s) and wait for the Standby power
LED to turn off.
11 Follow the instructions in “Opening the server case” on page 42.
Important Jumper J1B1 is located on the IMM Module board.
Jumper J1B1 on the IMM
Module board
8510522.book Page 36 Wednesday, March 16, 2005 11:19 AM