Filter
Top Products
40
www.gateway.com
Preparing to install components
Selecting a place to work
Work on your server in an area that:
■ Is clean (avoid dusty areas).
■ Is a low-static environment (avoid carpeted areas).
■ Has a stable surface on which to set your server.
■ Has enough room to place all of your server parts.
■ Is near a grounded outlet so you can test your server after installation.
■ Is near a telephone (in case you need help from Gateway Customer Care). The
telephone must be directly connected to a telephone jack and cannot be connected
to your server.
Gathering the tools you need
Some tools and supplies that you may need to work on your server are:
■ A notebook to take notes
■ A Phillips screwdriver
■ A small flat-blade screwdriver
■ Small containers to store various types of screws
■ A grounding wrist strap (available at most electronic stores)
Getting Help
If you have questions about performing any of these procedures, contact Gateway
Customer Care. For more information, see “Getting Help” on page 8.
Tips & Tricks Blue latches, thumbscrews, or connectors indicate tool-less
components.
Green latches and connectors indicate hot-swappable components.
8510522.book Page 40 Wednesday, March 16, 2005 11:19 AM