Filter
Top Products
Gem/n/ User’s Manual
Gemini-lox Loading Sprocket Paper
The Gemini-lox should be loaded with sprocket-fed paper
according to the following steps.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
24
Turn the power switch “off?
Install the tractor unit.
Install the paper separator and paper
guide, as described in Appendix G.
Pull the release lever, located on the left
side of the printer, toward the “open”
position (marked ‘IT”).
Lift up the paper press.
Pull the paper separator upright, as shown
in Figure 2-8.
Place the stack of fanfolded computer
paper behind the printer.
Pick up the top sheet of paper and feed it
between the paper chute and the platen
cover, from the back side of the platen.
Push the paper down and forward, so it
wraps around the platen.
Return the paper separator to its original
position,
Open the tractor covers atop the right- and
left-sprocket mechanisms, as shown in
Figure 2-9.
Pull the paper up, past the sprocket
mechanisms.
-