Filter
Top Products
Paper and Ribbon
17. Close the tractor covers.
.
18. Rotate the platen knob, and set the print-
start position of the paper.
19. Turn the power “on” and put your Gemini
to work for you.
NoWThe best “start-position” (step 18) will vary according to the
paper on which you are printing and the number of blank lines in
your document. If you are a novice with dot matrix printers, you
might try to position your paper just above the in-place paper press
for your first attempts. With practice, you’ll be able to place the
paper right where you want to start printing.
Another note: If you use multipart paper (such as a three-sheet
carbonless form) with your Gemini-15X, you’ll need to adjust the
print gap, as discussed later in this chapter.
Congratulations! You’ve learned how to load the paper.
Next, we’ll discuss the ribbon and print gap,
then you’ll be on your way to less reading and more printing.