Filter
Top Products
-
Gem/n/ User’s Manual
A
“Back Pass”
.
.
“Bottom Pass” :
.
.
loadlng :
Figure 2-13.
Whether you use the “bottom pass” (shown here) or the
“back pass” option (also shown), you start and end with the same steps.
13. Adjust the paper so that it will feed through
straight, and push the paper press back to
its operational position.
14.
Horizontally adjust the sprocket
mechanisms right or left so they align with
the sprocket holes on the paper.
15.
Vertically turn the sprocket “teeth” (the
little nubs on the sprocket wheels) so they
line up with the holes on the paper.
16. Snap the clamp levers back into the
“closed” position.
30