Filter
Top Products
Chapter 13 Alternative Rack Mounting (4–Post)
121
Figure 13-6. Mounting the HP Netserver
5. Slowly move the Netserver chassis into the outer-rail assemblies until the
Netserver is completely in the rack. See Figure 13-6.
The securing brackets on the front of the Netserver should stop the chassis
from going all the way into the rack.
6. Secure the Netserver chassis to the rack with captive screws.
Attaching the Front Bezel
The front bezel attaches to the HP Netserver by pivoting on two pins at the bottom
and grasping the top pins with spring latches. The middle pins force the bezel to
pivot in or out, ensuring a rotating action.
1. Position the Bezel in front of the HP Netserver LP 1000r as shown in Figure
13-7.