Filter
Top Products
Chapter 6 Installing an Additional Processor
56
Figure 6-7. Replacing the Air Duct
Firmware and Software Changes
This section describes the firmware changes provided by the HP Netserver
Navigator CD-ROM and the possible need to reinstall the NOS to recognize the
second processor.
Upgrading the Firmware
If your processor included a new HP Netserver Navigator CD-ROM, insert the CD
into the HP Netserver LP 1000r CD-ROM drive and power on the Netserver.
Follow the instructions provided on screen to ensure the system BIOS is
up-to-date. The system BIOS on the CD will be compared to the Netserver's
current BIOS and will indicate if the BIOS needs to be updated. Refer to Chapter
10, "Configuring the HP Netserver," for more information.