Filter
Top Products
85
10 Configuring the HP Netserver
Introduction
This chapter describes how to configure the HP Netserver with the help of the HP
Netserver Navigator CD-ROM, which is shipped with your Netserver. This
CD-ROM also provides the latest information concerning your Netserver.
As you configure the Netserver, it's important to have the very latest configuration
information. The CD-ROM will inform you of any applicable compatibility issues,
and provide you with a current list of HP-tested peripherals and accessories. Refer
to the "Tested Products List" on the HP Netserver Navigator CD-ROM, or on the
HP web site at:
http://www.hp.com/netserver/
You should also be familiar with HP DiagTools (on the HP Netserver Navigator
CD-ROM) and the HP Netserver Online Documentation CD-ROM to help you
configure the Netserver.
HP Netserver Navigator CD-ROM
The HP Netserver Navigator CD-ROM provides you with two modes for running
the CD-ROM and accessing its configuration utilities and resource information.
• Setup mode: insert the Navigator CD-ROM in your HP Netserver and boot
from it. Use the Navigator interface to configure your system, view important
information, and obtain drivers and utilities to setup your
HP Netserver through the installation of the Network Operating System
(NOS).
• Resource mode: insert the Navigator CD-ROM in a Microsoft Windows PC.
The CD will autorun to display the Navigator interface. Use the Navigator
interface to view online information resources and obtain drivers and
software utilities.