Filter
Top Products
Chapter 6 Installing an Additional Processor
48
Refer to Chapter 2, "Opening and Closing the HP Netserver," to gain access
to the system board.
NOTE It is not necessary to remove the system board from the
Netserver to install the second processor (CPU 2).
6. Loosen the two captive screws holding the air duct over the DIMM slots and
remove the air duct. See Figure 6-2.
Figure 6-2. Removing the Air duct
7. Ensure the processor speed of the second processor (CPU 2) is the same as the
existing processor before installing the second processor.