Filter
Top Products
Chapter 6 Installing an Additional Processor
54
Hook Latch
(hidden)
Step A
Tab
Tab
Tool
Latch
Processor
Socket
Figure 6-5. Placing the Heatsink on the Processor
CAUTION Ensure the left ridge on the bottom of the heatsink fits into the
groove between the processor socket and processor, while
both ridges should straddle the processor. If good contact is
not made between the processor and the heatsink, the
processor will overheat and possible damage may occur.
See Figures 6-5 and 6-6.
b. While holding the heatsink steady with one hand, push down and in toward
the center with your finger to hook the tab with the hook latch.
See Figure 6-6.