Filter
Top Products
Configuration Menu 111
System configuration
Command: /cfg/sys
[System Menu]
syslog - Syslog Menu
sshd - SSH Server Menu
radius - RADIUS Authentication Menu
tacacs+ - TACACS+ Authentication Menu
ntp - NTP Server Menu
ssnmp - System SNMP Menu
access - System Access Menu
date - Set system date
time - Set system time
timezone - Set system timezone (daylight savings)
olddst - Set system DST for US
dlight - Set system daylight savings
idle - Set timeout for idle CLI sessions
notice - Set login notice
bannr - Set login banner
hprompt - Enable/disable display hostname (sysName) in CLI prompt
bootp - Enable/disable use of BOOTP
dhcp - Enable/disable use of DHCP on Mgmt interface
reminders - Enable/disable Reminders
cur - Display current system-wide parameters
This menu provides configuration of switch management parameters such as user and administrator
privilege mode passwords, browser-based management settings, and management access list.
The following table describes the System Configuration Menu options.
Table 79
System Configuration Menu options
Command Usage
syslog
Displays the Syslog Menu.
sshd
Displays the SSH Server Menu.
radius
Displays the RADIUS Authentication Menu.
tacacs+
Displays the TACACS+ Menu.
ntp
Displays the Network Time Protocol (NTP) Server Menu.
ssnmp
Displays the System SNMP Menu.
access
Displays the System Access Menu.
date
Prompts the user for the system date.
time
Configures the system time using a 24-hour clock format.
timezone
Configures the time zone where the switch resides. You are prompted to
select your location (continent, country, region) by the timezone wizard.
Once a region is selected, the switch updates the time to reflect local
changes to Daylight Savings Time, etc.
olddst
Enables or disables use of the Daylight Saving Time (DST) rules in effect
prior to the year 2007. The default value is disabled.