Filter
Top Products
Information Menu 51
Route information
Command: /info/l3/route
[IP Routing Menu]
find - Show a single route by destination IP address
gw - Show routes to a single gateway
type - Show routes of a single type
tag - Show routes of a single tag
if - Show routes on a single interface
dump - Show all routes
Using the commands listed below, you can display all or a portion of the IP routes currently held in
the switch.
Table 27
Route Information menu options
Command Usage
find <IP address>
Displays a single route by IP address. For example,
100.10.1.1.
gw <IP address>
Displays routes to a single gateway. For example, 100.10.1.2.
type indirect|direct|local|
broadcast|martian|multicast
Displays routes of a single type.
tag fixed|static|addr|rip|ospf|
broadcast|martian|multicast
Displays routes of a single tag.
if <1-250>
Displays routes on a single interface.
dump
Displays all routes configured in the switch.
Show all IP Route information
Command: /info/l3/route/dump
Status code: * - best
Destination Mask Gateway Type Tag Metr If
--------------- --------------- --------------- --------- --------- ---- --
* 11.0.0.0 255.0.0.0 11.0.0.1 direct fixed 211
* 11.0.0.1 255.255.255.255 11.0.0.1 local addr 211
* 11.255.255.255 255.255.255.255 11.255.255.255 broadcast broadcast 211
* 12.0.0.0 255.0.0.0 12.0.0.1 direct fixed 12
* 12.0.0.1 255.255.255.255 12.0.0.1 local addr 12
* 12.255.255.255 255.255.255.255 12.255.255.255 broadcast broadcast 12
* 13.0.0.0 255.0.0.0 11.0.0.2 indirect ospf 2 211
* 47.0.0.0 255.0.0.0 47.133.88.1 indirect static 24
* 47.133.88.0 255.255.255.0 47.133.88.46 direct fixed 24
* 172.30.52.223 255.255.255.255 172.30.52.223 broadcast broadcast 2
* 224.0.0.0 224.0.0.0 0.0.0.0 martian martian
* 224.0.0.5 255.255.255.255 0.0.0.0 multicast addr