Filter
Top Products
Boot Options Menu 215
Accessing the ISCLI
To access the ISCLI, enter the following command from the AOS CLI, and reset the switch:
Boot Options# mode iscli
The default command-line interface for the HP 10GbE switch is the AOS CLI. To access the AOS CLI,
enter the following command and reset the switch:
>> Switch# boot cli-mode aos
Users can select the CLI mode upon login, if the /boot/prompt command is enabled. Only an
administrator connected through the console port can view and enable /boot/prompt. When
/boot/prompt is enabled, the first user to log in can select the CLI mode. Subsequent users must use
the selected CLI mode, until all users have logged out.