Filter
Top Products
Configuration Menu 131
Port configuration
Command: /cfg/port <port number>
[Port 1 Menu]
gig - Gig Phy Menu
aclqos - Acl/Qos Configuration Menu
stp - STP Menu - for PVRST only
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
rmon - Enable/Disable RMON for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
brate - Set BroadCast Threshold
mrate - Set MultiCast Threshold
drate - Set Dest. Lookup Fail Threshold
ena - Enable port
dis - Disable port
cur - Display current port configuration
This menu enables you to configure settings for individual switch ports. This command is enabled by
default.
NOTE: Port 17 is reserved for switch management.
The following table describes the Port Configuration Menu options.
Table 100
Port Configuration Menu options
Command Description
gig
Displays the Gigabit Ethernet Physical Link Menu.
aclqos
Displays the Access Control List (ACL)/Quality of Service (QoS) configuration
menu.
stp
Displays the port PVRST menu.
8021ppri
Configures the port’s 802.1p priority level.
pvid <1-4094>
Sets the default VLAN number which will be used to forward frames which are
not VLAN tagged. The default number is 1.
VLAN 4095 is reserved for switch management.
name <1-64
characters>|none
Sets a name for the port (maximum 64 characters). The assigned port name
displays next to the port number on some information and statistics screens.
rmon enable|disable
Enables or disables Remote Monitoring for the port. RMON must be enabled
for any RMON configurations to function.
tag enable|disable
Disables or enables VLAN tagging for this port. It is disabled by default.
tagpvid
enable|disable
Disables or enables VLAN tag persistence. When disabled, the VLAN tag is
removed from packets whose VLAN tag matches the port PVID. The default
value is enabled.
brate <0-262143>|dis
Limits the number of broadcast packets per second to the specified value. If
disabled (dis), the port forwards all broadcast packets.