Filter
Top Products
Configuration Menu 126
SNMPv3 Target Parameters Table configuration
Command: /cfg/sys/ssnmp/snmpv3/tparam
[SNMPv3 snmpTargetParamsTable 1 Menu]
name - Set targetParams name
mpmodel - Set message processing model
model - Set security model
uname - Set USM user name
level - Set minimum level of security
del - Delete targetParamsTable entry
cur - Display current targetParamsTable configuration
You can configure the target parameters entry and store it in the target parameters table in the SNMP
engine. This table contains parameters that are used to generate a message. The parameters include
the message processing model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for
example: USM), the security name, and the security level (noAuthnoPriv, authNoPriv, or
authPriv).
The following table describes the SNMPv3 Target Parameters Table Configuration Menu options.
Table 93
SNMPv3 Target Parameters Table Configuration Menu options
Command Description
name <1-32 characters>
Configures the locally arbitrary, but unique identifier that is associated with
this entry.
mpmodel
snmpv1|snmpv2c|snmpv3
Configures the message processing model that is used to generate SNMP
messages.
model usm|snmpv1|snmpv2
Selects the security model to be used when generating the SNMP
messages.
uname <1-32 characters>
Defines the name that identifies the user in the USM table, on whose behalf
the SNMP messages are generated using this entry.
level
noAuthNoPriv|authNoPriv|
authPriv
Selects the level of security to be used when generating the SNMP
messages using this entry. The level noAuthNoPriv means that the SNMP
message will be sent without authentication and without using a privacy
protocol. The level authNoPriv means that the SNMP message will be
sent with authentication but without using a privacy protocol. The
authPriv means that the SNMP message will be sent both with
authentication and using a privacy protocol.
del
Deletes the targetParamsTable entry.
cur
Displays the current targetParamsTable configuration.