Filter
Top Products
Operations Menu 208
Operations Menu
Introduction
Operations-level commands are used for making immediate and temporary changes to switch
configuration. The Operations Menu is used for bringing ports temporarily in and out of service. This
menu is available only from an administrator and operator login.
Menu information
Command: /oper
[Operations Menu]
port - Operational Port Menu
vrrp - Operational Virtual Router Redundancy Menu
passwd - Change current user password
clrlog - Clear syslog messages
ntpreq - Send NTP request
The following table describes the Operations Menu options.
Table 192
Operations Menu options
Command Description
port <port number>
Displays the Operational Port Menu.
vrrp
Displays the Operational Virtual Router Redundancy Menu.
passwd <1-128 characters>
Allows the user to change the password. You need to enter the current
password in use for validation.
clrlog
Clears all Syslog messages.
ntpreq
Allows the user to send requests to the NTP server.
Operations-level port options
Command: /oper/port <port number>
[Operations Port 1 Menu]
8021x - 802.1x Menu
rmon - Enable/Disable RMON for port
ena - Enable port
dis - Disable port
cur - Current port state