Filter
Top Products
Configuration Menu 165
Routing Information Protocol configuration
Command: /cfg/l3/rip
[Routing Information Protocol Menu]
if - RIP Interface Menu
update - Set update period in seconds
redist - RIP Route Redistribute Menu
on - Globally turn RIP ON
off - Globally turn RIP OFF
current - Display current RIP configuration
The RIP Menu is used for configuring Routing Information Protocol parameters. This option is turned off
by default.
The following table describes the RIP Configuration Menu options.
Table 139
RIP Configuration Menu options
Command Description
if <1-249>
Displays the RIP Interface menu.
update <1-120>
Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
redist
Displays the RIP Route Redistribute menu.
on
Globally turns RIP on.
off
Globally turns RIP off.
cur
Displays the current RIP configuration.