Filter
Top Products
Statistics Menu 73
Table 44 Statistics Menu options
Command Usage
sfd <clear>
Displays Server Link Failure Detection (SFD) statistics.
Add the argument, clear, to clear SFD statistics.
clrmp
Clears all Management Processor statistics.
dump
Dumps all switch statistics. Use this command to gather data for tuning and
debugging switch performance. If you want to capture dump data to a file, set
your communication software on your workstation to capture session data prior to
issuing the dump command.
Port Statistics Menu
Command: /stats/port <port number>
[Port Statistics Menu]
8021x - Show 802.1x stats
brg - Show bridging ("dot1") stats
ether - Show Ethernet ("dot3") stats
if - Show interface ("if") stats
ip - Show Internet Protocol ("IP") stats
link - Show link stats
rmon - Show RMON stats
clear - Clear all port stats
This menu displays traffic statistics on a port-by-port basis.
The following table describes the Port Statistics Menu options:
Table 45
Port Statistics Menu options
Command Usage
8021x
Displays IEEE 802.1X statistics
brg
Displays bridging (“dot1”) statistics for the port.
ether
Displays Ethernet (“dot3”) statistics for the port.
if
Displays interface statistics for the port.
ip
Displays Internet Protocol statistics for the port.
link
Displays link statistics for the port.
rmon
Displays Remote Monitoring (RMON) statistics for the port.
clear
Clears all the statistics on the port.