Filter
Top Products
Configuration Menu 125
Table 91 SNMPv3 Community Table Configuration Menu options
Command Description
tag <1-255 characters>
Configures a tag of up to 255 characters maximum. This tag specifies a set of
transport endpoints to which a command responder application sends an
SNMP trap.
del
Deletes the community table entry.
cur
Displays the community table configuration.
SNMPv3 Target Address Table configuration
Command: /cfg/sys/ssnmp/snmpv3/taddr
[SNMPv3 snmpTargetAddrTable 1 Menu]
name - Set target address name
addr - Set target transport address IP
port - Set target transport address port
taglist - Set tag list
pname - Set targetParams name
del - Delete targetAddrTable entry
cur - Display current targetAddrTable configuration
This menu allows you to set passwords and display current user statistics. Passwords can be a
maximum of 15 characters. To disable a user, set the password to null by simply pressing the Enter
key when prompted for the password.
The following table describes the SNMPv3 Target Address Table Configuration Menu options.
Table 92
SNMPv3 Target Address Table Configuration Menu options
Command Description
name <1-32 characters>
Configures the locally arbitrary, but unique identifier, target address
name associated with this entry.
addr <transport address ip>
Configures a transport address IP that can be used in the generation
of SNMP traps.
port <transport address port
(1-65535)>
Configures a transport address port that can be used in the
generation of SNMP traps.
taglist <1-255 characters>
Configures a list of tags (up to 255 characters maximum) that are
used to select target addresses for a particular operation.
pname <1-32 characters>
Defines the name as defined in
/cfg/sys/ssnmp/snmpv3/tparam/name.
del
Deletes the Target Address Table entry.
cur
Displays the current Target Address Table configuration.