Filter
Top Products
Information Menu 36
Layer 2 information
Command: /info/l2
[Layer 2 Menu]
fdb - Forwarding Database Information Menu
lacp - Link Aggregation Control Protocol Menu
hotlink - Show Hot Links information
8021x - Show 802.1X information
stp - Show STP information
cist - Show CIST information
trunk - Show Trunk Group information
vlan - Show VLAN information
uplink - Show uplink information
dump - Dump all layer 2 information
The following table describes the Layer 2 Information Menu options.
Table 18
Layer 2 Information Menu options
Command Usage
fdb
Displays the Forwarding Database Information Menu.
lacp
Displays the Link Aggregation Control Protocol Information Menu.
hotlink
Displays the Hot Links Information Menu.
8021x
Displays the 802.1X Information Menu.
stp
In addition to seeing if STP is enabled or disabled, you can view the following STP bridge
information:
• Priority
• Hello interval
• Maximum age value
• Forwarding delay
• Aging time
You can also refer to the following port-specific STP information:
• Port number and priority
• Cost
• State
cist
Displays Common internal Spanning Tree (CIST) bridge information, including the
following:
• Priority
• Hello interval
• Maximum age value
• Forwarding delay
You can also view port-specific CIST information, including the following:
• Port number and priority
• Cost
• State
trunk
When trunk groups are configured, you can view the state of each port in the various
trunk groups.