Filter
Top Products
Statistics Menu 72
Statistics Menu
Introduction
You can view switch performance statistics in the user, operator, and administrator command modes.
This chapter discusses how to use the CLI to display switch statistics.
Menu information
Command: /stats
[Statistics Menu]
port - Port Stats Menu
clrports - Clear stats for all ports
l2 - Layer 2 Stats Menu
l3 - Layer 3 Stats Menu
mp - MP-specific Stats Menu
acl - ACL Stats Menu
snmp - Show SNMP stats
ntp - Show NTP stats
ufd - Show Uplink Failure Detection stats
sfd - Show Server Link Failure Detection stats
clrmp - Clear all MP related stats
dump - Dump all stats
The following table describes the Statistics Menu options.
Table 44
Statistics Menu options
Command Usage
port <port number>
Displays the Port Statistics Menu for the specified port. Use this command to
display traffic statistics on a port-by-port basis. Traffic statistics are included in
SNMP Management Information Base (MIB) objects.
clrports
Clear statistics counters for all ports.
l2
Displays the Layer 2 Statistics Menu.
l3
Displays the Layer 3 Statistics Menu.
mp
Displays the Management Processor Statistics Menu. Use this command to view
information on how switch management processes and resources are currently
being allocated.
acl
Displays the Access Control List Statistics Menu.
snmp
Displays SNMP statistics.
ntp <clear>
Displays Network Time Protocol (NTP) Statistics.
You can execute the clear command option to delete all statistics.
ufd <clear>
Displays Uplink Failure Detection statistics.
Add the argument, clear, to clear UFD statistics.