Filter
Top Products
Configuration Menu 159
IP interface configuration
Command: /cfg/l3/if <1-250>
[IP Interface 1 Menu]
addr - Set IP address
mask - Set subnet mask
vlan - Set VLAN number
relay - Enable/disable BOOTP relay
ena - Enable IP interface
dis - Disable IP interface
del - Delete IP interface
cur - Display current interface configuration
The switch can be configured with up to 250 IP interfaces. Each IP interface represents the switch on
an IP subnet on your network. The IP Interface option is disabled by default.
The following table describes the IP Interface Configuration Menu options.
Table 130
IP Interface Configuration Menu options
Command Description
addr <IP address>
Configures the IP address of the switch interface, using dotted decimal
notation. For example, 192.2.14.101
mask <IP subnet mask>
Configures the IP subnet address mask for the interface using dotted
decimal notation. For example, 255.255.255.0
vlan <1-4094>
Configures the VLAN number for this interface. Each interface can belong
to one VLAN, though any VLAN can have multiple IP interfaces in it.
relay disable|enable
Enables or disables the BOOTP relay on this interface. The default value is
enabled.
ena
Enables this IP interface.
dis
Disables this IP interface.
del
Removes this IP interface.
cur
Displays the current interface settings.
NOTE: If you enter an IP address for interface 1, you are prompted to change the BOOTP setting.