Filter
Top Products
Configuration Menu 205
Table 189 Failure Detection Pair Configuration Menu options
Command Description
current
Displays the current FDP configuration.
Link to Monitor configuration
Command: /cfg/ufd/fdp/ltm
[Failure Link to Monitor Menu]
addport - Add port to Link to Monitor
remport - Remove port from Link to Monitor
addtrnk - Add trunk to Link to Monitor
remtrnk - Remove trunk from Link to Monitor
addkey - Add adminkey to Link to Monitor
remkey - Remove adminkey from Link to Monitor
cur - Display current LtM configuration
The following table describes the Link to Monitor (LtM) Menu options. The LtM can consist of only one
uplink port (ports 18-21) or a single trunk containing only uplink ports.
Table 190
Link to Monitor Menu options
Command Description
addport <port number>
Adds a port to the LtM. Only uplink ports (18-21) are allowed in the
LtM.
remport <port number>
Removes a port from the LtM.
addtrnk <1-12>
Adds a trunk group to the LtM. The LtM trunk group can contain only
uplink ports (18-21).
remtrnk <1-12>
Removes a trunk group from the LtM.
addkey <1-65535>
Adds a LACP admin key to the LtM. LACP trunks formed with this
admin key will be included in the LtM.
remkey <1-65535>
Removes a LACP admin key from the LtM.
cur
Displays the current LtM configuration.