Filter
Top Products
Information Menu 24
Information Menu
Introduction
You can view configuration information for the switch in the user, operator, and administrator
command modes. This chapter discusses how to use the CLI to display switch information.
Menu overview
Command: /info
[Information Menu]
sys - System Information Menu
l2 - Layer 2 Information Menu
l3 - Layer 3 Information Menu
qos - QoS Menu
acl - Show ACL information
rmon - Show RMON information
link - Show link status
port - Show port information
transcvr - Show Port Transceiver status
ufd - Show Uplink Failure Detection information
sfd - Show Server Link Failure Detection information
dump - Dump all information
The following table describes the Information Menu options.
Table 6
Information Menu options
Command Usage
sys
Displays system information.
l2
Displays the Layer 2 Information Menu.
l3
Displays the Layer 3 Information Menu.
qos
Displays the Quality of Service (QoS) Information Menu.
acl
Displays the Access Control List Information Menu.
rmon
Displays the Remote Monitoring Information Menu.
link
Displays configuration information about each port, including:
• Port number
• Port speed
• Duplex mode (half, full, or any)
• Flow control for transmit and receive (no, yes, or any)
• Link status (up or down)