Filter
Top Products
Configuration Menu 164
Table 137 Route Map Configuration Menu options
Command Description
type 1|2|none
Assigns the type of OSPF metric. The default is type 1.
• 1—External routes are calculated using both internal and external
metrics.
• 2—External routes are calculated using only the external metrics.
Type 2 routes have more cost than Type 2.
• none—Removes the OSPF metric.
prec <1-255>
Sets the precedence of the route map. The smaller the value, the higher
the precedence. Default value is 10.
enable
Enables the route map.
disable
Disables the route map.
delete
Deletes the route map.
cur
Displays the current route configuration.
IP Access List configuration
Command: /cfg/l3/rmap <1-32>/alist <1-8>
[IP Access List 1 Menu]
nwf - Network Filter number
metric - Metric
action - Set Network Filter action
enable - Enable Access List
disable - Disable Access List
delete - Delete Access List
current - Display current Access List configuration
The route map number <1-32> and the access list number <1-8> represent the IP access list you
wish to configure. The following table describes the IP Access List Configuration Menu options.
Table 138
IP Access List Configuration Menu options
Command Description
nwf <1-256>
Sets the network filter number.
metric <1-16777214>|none
Sets the metric value in the AS-External (ASE) LSA.
action permit|deny
Permits or denies action for the access list.
enable
Enables the access list.
disable
Disables the access list.
delete
Deletes the access list.
cur
Displays the current Access List configuration.