Filter
Top Products
Configuration Menu 168
Open Shortest Path First configuration
Command: /cfg/l3/ospf
[Open Shortest Path First Menu]
aindex - OSPF Area (index) Menu
range - OSPF Summary Range Menu
if - OSPF Interface Menu
virt - OSPF Virtual Links Menu
md5key - OSPF MD5 Key Menu
host - OSPF Host Entry Menu
redist - OSPF Route Redistribute Menu
lsdb - Set the LSDB limit for external LSA
default - Export default route information
on - Globally turn OSPF ON
off - Globally turn OSPF OFF
cur - Display current OSPF configuration
The following table describes the Open Shortest Path First Menu options.
Table 142
OSPF Configuration Menu options
Command Description
aindex <0-2>
Displays the area index menu. This area index does not represent
the actual OSPF area number.
range <1-16>
Displays summary routes menu for up to 16 IP addresses.
if <1-249>
Displays the OSPF interface configuration menu.
virt <1-3>
Displays the Virtual Links menu used to configure OSPF for a Virtual
Link.
md5key <1-255 characters>
Assigns a string to MD5 authentication key.
host <1-128>
Displays the menu for configuring OSPF for the host routes. Up to
128 host routes can be configured. Host routes are used for
advertising network device IP addresses to external networks to per-
form server load balancing within OSPF. It also makes Area Border
Route (ABR) load sharing and ABR failover possible.
redist <fixed|static|rip>
Displays Route Distribution Menu.
lsdb <0-2000>
Sets the link state database limit. Enter 0 (zero) for no limit.
default <1-16777214>|none
Sets one default route among multiple choices in an area.
Enter none for no default route.
on
Enables OSPF.
off
Disables OSPF.
cur
Displays the current OSPF configuration settings.