Filter
Top Products
Operations Menu 209
Operations-level port options are used for temporarily disabling or enabling a port.
Table 193
Operations-Level Port Menu options
Command Description
8021x
Displays the 802.1X Port Menu.
rmon disable|enable
Enables or disables Remote Monitoring for the port. RMON must be enabled for
any RMON configurations to function.
ena
Temporarily enables the port. The port will be returned to its configured
operation mode when the switch is reset.
This command does not enable a port that has been disabled by an ekeying
mismatch error.
dis
Temporarily disables the port. The port will be returned to its configured
operation mode when the switch is reset.
cur
Displays the current settings for the port.
Operations-level port 802.1X options
Command: /oper/port <port number>/8021x
[802.1X Operation Menu]
reset - Reinitialize 802.1X access control on this port
reauth - Initiate reauthentication on this port now
Operations-level port 802.1X options are used to temporarily set 802.1X parameters for a port.
Table 194
Operations-Level Port 802.1X Menu options
Command Description
reset
Re-initializes the 802.1X access-control parameters for the port. The following actions
take place, depending on the 802.1X port configuration:
• force unauth—the port is placed in unauthorized state, and traffic is blocked.
• auto—the port is placed in unauthorized state, then authentication is initiated.
• force auth—the port is placed in authorized state, and authentication is not
required.
reauth
Re-authenticates the supplicant (client) attached to the port. This command only applies
if the port’s 802.1X mode is configured as auto.