Filter
Top Products
Information Menu 58
Routing Information Protocol information
Command: /info/l3/rip
[RIP Information Menu]
routes - Show RIP routes
dump - Show RIP user's configuration
The following table describes the Routing Information Protocol information menu options.
Table 34
RIP information
Command Usage
routes
Displays information about RIP routes.
dump <0-249>
Displays RIP user’s configuration. Enter 0 (zero) for all interfaces.
RIP Routes information
Command: /info/l3/rip/routes
>> IP Routing# /info/l3/rip/routes
3.0.0.0/8 via 30.1.1.11 metric 4
4.0.0.0/16 via 30.1.1.11 metric 16
10.0.0.0/8 via 30.1.1.2 metric 3
20.0.0.0/8 via 30.1.1.2 metric 2
This table contains all dynamic routes learned through RIP, including the routes that are undergoing
garbage collection with metric = 16. This table does not contain directly connected routes and locally
configured static routes.
RIP user configuration
Command: /info/l3/rip/dump <1-249>
RIP USER CONFIGURATION :
RIP on update 30
RIP Interface 2 : 102.1.1.1, enabled
version 2, listen enabled, supply enabled, default none
poison disabled, trigg enabled, mcast enabled, metric 1
auth none, key none
RIP Interface 3 : 103.1.1.1, enabled
version 2, listen enabled, supply enabled, default none
poison disabled, trigg enabled, mcast enabled, metric 1