Filter
Top Products
Configuration Menu 154
Table 123 Protocol VLAN Configuration Menu options
Command Description
prio <0-7>
Configures the priority value for this PVLAN.
add
Adds a port to the selected PVLAN.
rem
Removes a port from the selected PVLAN.
ports
Defines a list of ports that belong to the selected protocol on this VLAN.
Enter 0 (zero) to remove all ports.
tagpvl enable|disable
Enables or disables port tagging on this PVLAN.
taglist
Defines a list of ports that will be tagged by the selected protocol on this
VLAN. Enter empty to disable tagging on all ports by this PVLAN.
ena
Enables the selected protocol on the VLAN.
dis
Disables the selected protocol on the VLAN.
del
Deletes the selected protocol configuration from the VLAN.
cur
Displays the current configuration for this Protocol VLAN.
Private VLAN configuration
Command: /cfg/l2/vlan x/privlan
[privlan Menu]
type - Set Private-VLAN type
map - Associate secondary VLAN with a primary VLAN
ena - Enable Private-VLAN
dis - Disable Private-VLAN
cur - Display current Private-VLAN configuration
The following table describes the Private VLAN Configuration Menu options.
Table 124
Private VLAN Configuration Menu options
Command Description
type primary|isolated|community
Defines the VLAN type, as follows:
• Primary: A Private VLAN must have only one primary VLAN.
The primary VLAN carries unidirectional traffic to ports on the
isolated VLAN or to community VLAN.
• Isolated: The isolated VLAN carries unidirectional traffic from
host ports. A Private VLAN may have only one isolated VLAN.
• Community: Community VLANs carry upstream traffic from
host ports. A Private VLAN may have multiple community
VLANs.
map <2-4094>
Configures Private VLAN mapping between a secondary VLAN
(isolated or community) and a primary VLAN. Enter the
primary VLAN ID.
ena
Enables the Private VLAN.