Filter
Top Products
Configuration Menu 123
Table 88 SNMPv3 View Configuration Menu options
Command Description
del
Deletes the vacmViewTreeFamily group entry.
cur
Displays the current vacmViewTreeFamily configuration.
View-based Access Control Model configuration
Command: /cfg/sys/ssnmp/snmpv3/access
[SNMPv3 vacmAccess 1 Menu]
name - Set group name
model - Set security model
level - Set minimum level of security
rview - Set read view index
wview - Set write view index
nview - Set notify view index
del - Delete vacmAccess entry
cur - Display current vacmAccess configuration
The view-based Access Control Model defines a set of services that an application can use for
checking access rights of the user. Access control is needed when the user has to process SNMP
retrieval or modification request from an SNMP entity.
The following table describes the User Access Control Configuration Menu options.
Table 89
View-based Access Control Configuration Menu options
Command Description
name <1-32 characters>
Defines the name of the group, up to a maximum of 32 characters.
model usm|snmpv1|snmpv2
Selects the security model to be used.
level
noAuthNoPriv|authNoPriv
|authPriv
Defines the minimum level of security required to gain access rights. The level
noAuthNoPriv means that the SNMP message will be sent without
authentication and without using a privacy protocol. The level authNoPriv
means that the SNMP message will be sent with authentication but without
using a privacy protocol. The authPriv means that the SNMP message will
be sent both with authentication and using a privacy protocol.
rview <1-32 characters>
Defines a 32 character long read view name that allows you read access to
a particular MIB view. If the value is empty or if there is no active MIB view
having this value then no access is granted.
wview <1-32 characters>
Defines a 32 character long write view name that allows you write access to
the MIB view. If the value is empty or if there is no active MIB view having
this value then no access is granted.
nview <1-32 characters>
Defines a 32 character long notify view name that allows you notify access to
the MIB view.
del
Deletes the View-based Access Control entry.
cur
Displays the View-based Access Control configuration.