Filter
Top Products
Statistics Menu 86
Layer 3 statistics
Command: /stats/l3
[Layer 3 Statistics Menu]
geal3 - GEA Layer 3 Stats Menu
ip - Show IP stats
route - Show route stats
arp - Show ARP stats
dns - Show DNS stats
icmp - Show ICMP stats
tcp - Show TCP stats
udp - Show UDP stats
igmp - Show IGMP stats
ospf - OSPF stats
vrrp - Show VRRP stats
clrvrrp - Clear VRRP stats
rip - Show RIP stats
igmpgrps - Total number of IGMP groups
ipmcgrps - Total number of IPMC groups
clrigmp - Clear IGMP stats
ipclear - Clear IP stats
ripclear - Clear RIP stats
ospfclear - Clear all OSPF stats
dump - Dump layer 3 stats
The following table describes the Layer 3 Statistics Menu options.
Table 56
Layer 3 Statistics Menu options
Command Usage
geal3
Displays the GEA statistics menu.
ip
Displays IP statistics.
route
Displays route statistics.
arp <clear>
Displays Address Resolution Protocol (ARP) statistics. Add the
argument clear, to clear ARP statistics.
dns
Displays Domain Name System (DNS) statistics.
icmp
Displays ICMP statistics.
tcp
Displays Transmission Control Protocol (TCP) statistics. Add the
argument, clear, to clear TCP statistics.
udp
Displays User Datagram Protocol (UDP) statistics. Add the argument,
clear, to clear UDP statistics.
igmp
Displays IGMP statistics.
ospf
Displays OSPF statistics menu.
vrrp
When virtual routers are configured, you can display statistics for the
virtual routers.
clrvrrp
Clears VRRP statistics.
rip
Displays Routing Information Protocol (RIP) statistics.
igmpgrps
Displays the total number of Internet Group Management Protocol
(IGMP) groups registered the switch.