Filter
Top Products
Configuration Menu 202
Table 185 RMON Alarm Menu options
Command Description
revtidx <0-65535>
Configures the rising alarm event index that is triggered
when a rising threshold is crossed.
The range is from 0 to 65535. The default value is 0.
fevtidx <0-65535>
Configures the falling alarm event index that is triggered
when a falling threshold is crossed.
The range is from 0 to 65535. The default value is 0.
owner <1-127 characters>
Enter a text string that identifies the person or entity that uses
this alarm index.
The owner can have a maximum of 127 characters.
delete
Deletes this alarm index.
cur
Displays the current RMON Alarm parameters.
Port mirroring
Command: /cfg/pmirr
[Port Mirroring Menu]
mirror - Enable/Disable Mirroring
monport - Monitoring Port based PM Menu
cur - Display All Mirrored and Monitoring Ports
The Port Mirroring Configuration Menu is used to configure, enable, and disable the monitored port.
When enabled, network packets being sent and/or received on a target port are duplicated and sent
to a monitor port. By attaching a network analyzer to the monitor port, you can collect detailed
information about your network performance and usage. Port mirroring is disabled by default.
NOTE: See the “Troubleshooting tools” appendix in the HP 10Gb Ethernet BL-c Switch Application
Guide for information on how to use port mirroring.
The following table describes the Port Mirroring Configuration Menu options.
Table 186
Port Mirroring Configuration Menu options
Command Description
mirror disable|enable
Enables or disables port mirroring
monport <port number>
Displays port mirroring menu.
cur
Displays current settings of the mirrored and monitoring ports.