Filter
Top Products
To verify that the software is properly installed, double-click the HP Solution Center icon
on the desktop. If the HP Solution Center shows the essential icons (Scan Picture and
Scan Document), the software has been properly installed.
Network troubleshooting
This section addresses problems you might encounter setting up a network. Check the
device display for specific error messages.
This section contains the following topics:
•
During wireless network setup you do not see the SSID (network name) displayed
•
Weak signal
•
Cannot connect to network during setup
•
Invalid WEP key during wireless setup
•
Invalid passphrase during wireless setup
•
The Printer Not Found screen appears during installation
During wireless network setup you do not see the SSID (network name) displayed
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
•
Solution 1: Turn on the Broadcast SSID option
•
Solution 2: Establish a good signal between the product and wireless router
(infrastructure) or computer (ad hoc)
•
Solution 3: Check if your network name (SSID) is at the bottom of the SSID list
•
Solution 4: Unplug the Ethernet cable
Solution 1: Turn on the Broadcast SSID option
Solution: Access the router's Embedded Web Server and turn on the Broadcast
SSID option. See the user guide that came with your wireless router for information
on how to access the Embedded Web Server and check the Broadcast SSID setting.
For more information, see:
“
Connect to an integrated wireless WLAN 802.11 network” on page 13
Network troubleshooting 109
Troubleshooting