Filter
Top Products
Insert and remove a memory card
NOTE: The product recognizes memory cards up to 2 GB.
1. Push the memory card into the appropriate memory slot to seat it.
NOTE: You can use only one memory card in the product at a time. If two or more are inserted,
the product displays an error message.
2. The product reads the card, and then the product control panel displays X photos found on
card, where X is the number of recognized .JPEG files found on the memory card.
After a few seconds, the message Photo Menu appears on the control-panel display. Now you
can use the product to print photos. See
Print photos directly from the memory card
on page 163.
3. Grasp the card and gently pull it straight out of the memory card slot to remove it.
CAUTION: To avoid damaging the files stored on the card, do not remove a memory card while
the product is accessing it. Wait for the LED near the memory card slots to stop blinking before
you remove the memory card. When the LED remains illuminated, it is safe to remove the memory
card.
ENWW Insert a memory card 161