Filter
Top Products
Menu item Sub-menu item Sub-menu item Description
on printed output. The cleaning
process removes dust and
excess toner from the paper
path.
When selected, the product
prompts you to load plain Letter
or A4 paper in tray 1. Press
OK to begin the cleaning
process. Wait until the process
completes. Discard the page
that prints.
PowerSave Time Off
1 minute
15 minutes
30 minutes
1 hour
2 hours
4 hours
Specify the amount of idle time
before the product enters sleep
mode.
USB speed High
Full
Sets the USB speed.
Less paper curl On
Off
When printed pages are
consistently curled, this option
sets the product to a mode that
reduces curl.
The default setting is Off.
Archive print On
Off
When printing pages that will
be stored for a long time, this
option sets the product to a
mode that reduces toner
smearing and dusting.
The default setting is Off.
Restore defaults Sets all customized settings to
the factory default values.
Table 2-7 Network configuration menu
Menu item Sub-menu item Description
TCP/IP configuration Automatic
Manual
Automatic automatically configures all the TCP/IP settings via
DHCP, BootP or AutoIP.
Manual requires you to manually configure the IP address, subnet
mask, and default gateway.
The control panel prompts you to specify values for each address
section. Use the arrow buttons to increase or decrease the value.
Press OK to accept the value and move the cursor to the next field.
Table 2-6 Service menu (continued)
ENWW Control-panel menus 19