Filter
Top Products
Menu item Sub-menu item Description
As each address is completed, the product prompts for address
confirmation before moving to the next one. After all three
addresses are set, the product automatically restarts.
Memory Card (memory
card products only)
On
Off
Enables or disables the use of the memory card slots.
Auto crossover On
Off
Enable or disable the use of a standard 10/100 network cable when
the product is directly connected to a PC.
Network services IPv4
IPv6
DHCPv6
Sets whether the product will use either IPv4, IPv6, or DHCPv6
protocol.
Show IP address Yes
No
Sets whether the product displays the IP address on the control
panel.
Link speed Automatic (Default)
10T Full
10T Half
100TX Full
100TX Half
Sets the link speed manually if needed.
After setting the link speed, the product automatically restarts.
Restore defaults Resets all network configurations to their factory defaults.
Function specific menus
The product features function-specific menus for faxing, copying, scanning, and managing photos on a
memory card. To access these menus, press the Fax Menu Copy Menu Scan Menu or Photo Menu
buttons respectively.
These are the features supported by the function specific menus.
●
Use the Fax menu to perform basic fax functions such as sending a fax or editing the phone book,
reprinting faxes that were previously printed, or printing faxes that are stored in memory.
●
Use the Copy menu to access basic copy functions and customize the copy output.
●
Use the Scan menu to display a list of preconfigured folders and e-mail destinations to select from.
●
Use the Email menu (HP Color LaserJet CM2320 MFP Fax Model only) to send e-mail.
●
Use the Photo menu (HP Color LaserJet CM2320 MFP Memory-Card Model only) to display a list
of photo options for a valid inserted memory card.
Table 2-7 Network configuration menu (continued)
20 Chapter 2 Control panel ENWW