Filter
Top Products
Smeared toner
●
Make sure to use
supported media.
White areas (dropouts) on
page
●
Make sure that the
operation and location
requirements of the
printer are met.
●
Make sure to use
supported media.
●
Make sure that the
media you are using
does not have any
wrinkles or dents from
handling, and that the
media is not
contaminated with
visible fingerprints or
other foreign
substances.
●
Make sure that the
media type and size for
the tray are set correctly
in the control panel for
the media that you are
using.
●
Calibrate the printer.
●
Print the Print Quality
Troubleshooting Pages
(see
Print quality
troubleshooting) and
follow the diagnostic
procedure listed on the
first page to help isolate
the defect to a particular
component.
Media damage (wrinkles,
curl, creases, tears)
●
Make sure that the
operation and location
requirements of the
printer are met.
●
Make sure to use
supported media.
●
Make sure that the
media is loaded
correctly.
●
Make sure that the
media type and size for
the tray are set correctly
in the control panel for
the media that you are
using.
●
Make sure that the
media you are using
does not have any
Specks or stray toner
●
Make sure that the
operation and location
requirements of the
printer are met.
●
Make sure to use
supported media.
●
Make sure that the
media type and size for
the tray are set correctly
in the control panel for
the media that you are
using.
●
Calibrate the printer.
●
Print the Print Quality
Troubleshooting Pages
(see
Print quality
troubleshooting) and
follow the diagnostic
procedure listed on the
ENWW Print quality troubleshooting 257