Filter
Top Products
8. Press or to select the appropriate time period.
9. Press
to set the time period.
10. Press Menu.
CAUTION If paper is loaded in Trays 3 through 6 when the printer is in sleep mode, the
new paper will not be sensed when the printer comes out of sleep mode. This could cause
the wrong paper to be used for a print job. Be sure to wake the printer before loading paper
in these trays.
Disabling/enabling sleep mode
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight RESETS.
5. Press
to select RESETS.
6. Press
to highlight SLEEP MODE.
7. Press
to select SLEEP MODE.
8. Press
or to select ON or OFF.
9. Press
to set the selection.
10. Press Menu.
Wake time
The wake time feature allows you to instruct the printer to wake at a certain time on selected days, to
eliminate waiting for the warm-up and calibration periods. You must have SLEEP MODE on to set the
wake time.
To set or change the wake time, use the following steps:
Setting the wake time
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight WAKE TIME.
7. Press
to select WAKE TIME.
8. Press
or to select the day of the week.
70 Chapter 2 Control panel ENWW