Filter
Top Products
7. Press to select TRAY BEHAVIOR.
8. Press
to select USE REQUESTED TRAY.
9. Press
or to select EXCLUSIVELY or FIRST.
10. Press
to set the behavior.
11. Press Menu.
Setting manually feed prompt
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight TRAY BEHAVIOR.
7. Press
to select TRAY BEHAVIOR.
8. Press
to highlight MANUALLY FEED PROMPT.
9. Press
to select MANUALLY FEED PROMPT.
10. Press
or to select ALWAYS or UNLESS LOADED.
11. Press
to set the behavior.
12. Press Menu.
Setting the printer default for PS defer media
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight TRAY BEHAVIOR.
7. Press
to select TRAY BEHAVIOR.
8. Press
to highlight PS DEFER MEDIA.
9. Press
to select PS DEFER MEDIA.
10. Press
to select ENABLED or DISABLED.
11. Press
to set the behavior.
12. Press Menu.
ENWW Changing printer control panel configuration settings 67