Filter
Top Products
Setting color supply out response
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight COLOR SUPPLY OUT.
7. Press
to select COLOR SUPPLY OUT.
8. Press
or to select the appropriate setting.
9. Press
to set the selection.
10. Press Menu.
Jam recovery
This option allows you to configure the printer response to paper jams, including how it handles the
pages involved. AUTO is the default value.
●
AUTO — the printer automatically turns jam recovery on when sufficient memory is available.
●
OFF — the printer will not reprint any page that was involved in a paper jam. Since no memory is
used to store the most recent pages, performance may be optimal.
●
ON — the printer reprints any page involved in a paper jam. Additional memory is allocated to store
the last few pages printed, and this might cause overall printer performance to suffer.
Setting jam recovery response
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight JAM RECOVERY.
7. Press
to select JAM RECOVERY.
8. Press
or to select the appropriate setting.
9. Press
to set the selection.
10. Press Menu.
ENWW Changing printer control panel configuration settings 75