Filter
Top Products
7. Press to select JOB HELD TIMEOUT.
8. Press
or to select the appropriate time period.
9. Press
to set the time period.
10. Press Menu.
Show IP address
This item determines whether the printer IP address is shown on the display with the Ready message.
Options are AUTO and OFF. The default setting for this option is OFF. If more than one EIO card is
installed, the IP address of the card installed in the first slot appears.
Showing the IP address
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight SHOW ADDRESS.
7. Press
to select SHOW ADDRESS.
8. Press
or to select the desired option.
9. Press
to select the option.
10. Press Menu.
Color/black mix
This item allows you to configure printer settings to optimize printer and cartridge performance for the
printing environment. If the printer is primarily used for black printing (over two-thirds of the pages are
black only), change the printer settings to MOSTLY BLACK PAGES. If the printer is primarily used for
color printing, change the printer settings to MOSTLY COLOR PAGES. If the printer is used for a mix
of black-only and color print jobs, it is recommended that you use the printer default of AUTO. To
determine the percentage of color pages, print a configuration page. See
Printer information pages to
learn how to print a configuration page. The configuration page shows the total number of pages printed
and the number of color pages printed. To determine the percentage of color pages printed, divide the
color page count by the total page count.
Setting the color/black mix
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
ENWW Changing printer control panel configuration settings 65