Filter
Top Products
9. Press to accept the selection.
10. Press
or to select CUSTOM or Off.
11. Press
to accept the selection.
12. Press
or to select the hour.
13. Press
to accept the selection.
14. Press
or to select the minutes.
15. Press
to accept the selection.
16. Press
or to select AM or PM.
17. Press
to accept the selection.
18. Press
to enter APPLY TO ALL DAYS.
19. Press
or to select YES or NO.
20. Press
to accept the selection.
21. Press
or to select the days of the week to which WAKE TIME applies.
22. Press
to accept each selection.
23. Press Menu.
Display brightness
The display brightness feature allows you to set the level of brightness for the control panel display. The
allowable range of values is 1 through 10. The default for this feature is 5.
To change or set the display brightness, use the following steps:
Setting the display brightness
1. Press Menu to enter the MENUS.
2. Press
to highlight CONFIGURE DEVICE.
3. Press
to select CONFIGURE DEVICE.
4. Press
to highlight SYSTEM SETUP.
5. Press
to select SYSTEM SETUP.
6. Press
to highlight DISPLAY BRIGHTNESS.
7. Press
to select DISPLAY BRIGHTNESS.
8. Press
or to highlight the desired value.
9. Press
to accept the selection.
10. Press Menu.
ENWW Changing printer control panel configuration settings 71