Filter
Top Products
Interpreting stapler/stacker indicator light codes
The following table lists errors that can occur in the stapler/stacker unit that are reported by the accessory
light and on the printer control panel display.
Indicator Solid Blinking Off
Green
NOTE The
indicator light shows
solid green during
some continuable
errors.
●
The accessory is ready
and is functioning
properly.
●
Fewer than 20 staples
remain in the stapler
cartridge. STAPLER
LOW ON STAPLES
appears on the printer
control panel display.
Order and replace the
stapler cartridge.
●
The number of pages in
the job exceeds the 30-
page limit for stapling.
TOO MANY PAGES IN
JOB TO STAPLE
appears on the printer
control panel display.
For jobs larger than 30
pages, staple the pages
manually.
●
The job contains
different paper sizes.
The stapler cannot align
the paper for stapling. If
stapling is required, print
the job on same-size
N/A
●
The stapler/stacker is in
sleep mode, the printer
is turned off, or the
stapler/stacker is not
installed properly.
ENWW Interpreting stapler/stacker indicator light codes 43