Filter
Top Products
Chapter 6
Removing and Replacing Components
Front and Top Covers
183
Step 3. Pull the cover toward the rear of the server to free the tabs from the slots in the center of the
chassis and lift the cover straight up.
Figure 6-5 Removing and Replacing the Top Cover
Replacing the Top Cover
To replace the top cover, follow these steps:
Step 1. Align the tabs at the rear of the top cover with the corresponding slots in the chassis. Fully seat the
tabs into the slots, and push forward until it seats.
Step 2. Using a Torx T15 driver, tighten the two thumbscrews securely.
Rear of Chassis
Thumbscrews