Filter
Top Products
Chapter 6
Removing and Replacing Components
I/O Baseboard Assembly
210
Step 1. Before installing the replacement I/O baseboard, check the dipswitch S5102 located on top of the
I/O baseboard. Dipswitch bit 1 must be in the OFF position to disable the onboard Radeon graphics
chip. If you do not disable the Radeon graphics chip, it appears as “unknown-unclaimed” in the
ioscan output.
Figure 6-23 S5102 Dipswitch Setting
NOTE The I/O baseboard is large. Use care when sliding it into the server chassis.
S5102 (Switch #1) VGA Dipswitch
Off