Filter
Top Products
Chapter 6
Removing and Replacing Components
U320 SCSI Enablement and Conversion Procedures
239
Step 6. Connect the other end of SCSI cable B to the SCSI B channel connector on the SCSI adapter board.
Figure 6-38 Connecting SCSI Cable B to the SCSI Adapter Board
Step 7. Close the swivel latch on top of the hot-pluggable disk drive cage.
Step 8. Replace the two hot-pluggable disk drives into the disk drive cage.
Installing the Server Components
To Install the necessary components in the server chassis, follow these steps:
Step 1. Install the processor extender board. See “Replacing the Processor Extender Board” on page 194.
Step 2. Install the memory extender board. See “Replacing the Memory Extender Board” on page 186.
Step 3. Install the front cover. See “Replacing the Front Cover” on page 182.
Step 4. Install the front bezel. See “Replacing the Front Bezel” on page 180.