Filter
Top Products
Installing the System
Installing Additional Components
Chapter 3
93
Figure 3-27 Installing the Processor on the Extender Board
4
2
3
1
Tightening Sequence for 4-Shoulder
Screws is 1, 2, 3, 4
DO NOT OVERTIGHTEN (See Step 7)
2 Knurled
Thumb-
Screws
Align Pins on
Heatsink with
Slots in
Frame
Power Cable Protected by
Plastic Sleeve
Slots*
Slots*
*Slots shown are at
CPU1 socket.
Processor shown is
being mounted on
socket CPU0 per load
order.
Torx-T15
Use Torx T15 Driver
to Tighten Shoulder
Screws and
Thumbscrews
2.5 MM Allen Key