Filter
Top Products
Chapter 6
Removing and Replacing Components
Replacing Dual Processor Modules
202
Figure 6-18 Installing Dual Processor Module on Processor Extender Board
Step 13. Replace the processor extender board in the server. (See “Replacing the Processor Extender Board”
on page 194.)
4
2
3
1
Tightening sequence for 4-shoulder screws is 1, 2, 3, 4.
DO NOT OVERTIGHTEN (see step 7).
2 Knurled
Thumb-
Screws
Align Pins on
Heatsink with
Slots in
Frame
Power Cable (Protected by
Plastic Sleeve)
Slots*
Slots*
*Slots shown are at
CPU1 socket.
Processor shown is
being mounted on
CPU0 socket per CPU
load order.
Torx-T15: Use to
Tighten Shoulder
Screws and
Thumbscrews
2.5-mm Allen
Key