Filter
Top Products
Chapter 1
Overview
Dimensions and Values
24
The firmware incorporates the BCH which provides an interface between the operating system and the
platform firmware. BCH uses data tables that contain platform-related information, and boot and run-time
service calls available to the operating system and its loader to provide a standard environment for booting.
The firmware supports the HP-UX 11i version 1 (or higher) operating system through the HP 9000 processor
family standards and extensions, and has no operating system-specific functionality included. The operating
system is presented with the same interface to system firmware, and all features are available to the
operating system.
Event IDs for Errors and Events
The server firmware generates event IDs similar to chassis codes for errors, events, and forward progress to
the Integrity Integrated Light-Out Management Processor (iLO MP) through common shared memory. The
Integrity iLO MP interprets and stores event IDs. Reviewing these events helps you diagnose and
troubleshoot problems with the server.
Dimensions and Values
Table 1-1 lists the dimensions and their values of the HP 9000 rp4410 and rp4440 servers.
Controls, Ports, and LEDs
This section describes the controls, ports, and LEDs found on the front panel, rear panel, and internal
locations of the HP 9000 rp4410 and rp4440 servers.
Front Panel
The front panel of the server provides the controls and indicators commonly used for operation.
Table 1-1 Server Dimensions and Values
Dimension Value
Height 6.8 in (17.3 cm)
Width 19 in (48.2 cm)
Depth 27.2 in (69.0 cm)
Weight Unloaded 88 lbs (40 kg)
Fully loaded 100 lbs (45.4 kg)