Filter
Top Products
Chapter 6
Removing and Replacing Components
System Battery
213
Step 13. Verify the system board replacement and operation by using the system utilities. If you have set the
time and date and configured the iLO MP, the I/O baseboard assembly is installed and operating
correctly. If you have not yet set the time and date or configured the iLO MP:
• Use the iLO MP commands to verify operation.
• Use the BCH commands to verify operation.
Removing and Replacing the I/O Baseboard Locking Lever
The I/O baseboard locking lever is comprised of the plastic lever, a label on the lever, and a metal spring
inside the lever.
To remove the I/O baseboard locking lever, follow these steps:
Step 1. Remove the I/O baseboard assembly. (See “Removing the I/O Baseboard Assembly” on page 207.)
Step 2. Use a T15 torx screwdriver to remove all three screws from the metal plate on the locking lever.
Step 3. Lift the metal plate off the plastic locking lever (make note of how the plate is positioned on the
lever).
Step 4. Keep the metal cover and the screws together. You will use them to install the replacement lever.
To replace the I/O baseboard locking lever, follow these steps:
Step 1. Place the metal plate on the locking lever using the position of the screw holes on the locking lever
to align with the holes on the metal plate. Make sure to position the metal plate on the lever so the
part of the lever with spring fits between the grove on the metal plate.
Step 2. Line the screw hole on the metal plate that is closest to the grove with the mounting hole on the
plastic lever.
Step 3. Mount the lever on the standoff making sure to align the holes.
Step 4. Insert and tighten the three screws.
Step 5. Replace the I/O baseboard assembly. (See “Replacing the I/O Baseboard Assembly” on page 209.)
System Battery
This section provides information and procedures for replacing the system battery.
Battery Notice
This product contains a Lithium battery.
WARNING Lithium batteries can explode if mistreated. Do not recharge, disassemble, or
dispose of lithium batteries in a fire. Failure to observe this warning can result in
personal injury or damage to equipment.